ISO 9001:2015 - AS9100D Registered

Corrosion Protection Products

Great Products for Corrosion Protection

Century Fasteners understands that corrosion is one of the largest and most costly problems that manufactures and the military have. We offer several products that provide solutions to these problems. These products have been tested in the most hostile environments by some of the largest manufactures in the world as well as all branches of the US military and have surpassed all other corrosion preventative compounds in the industry.

See products, data sheets and label PDF’s below.

Not for sale to the general public, business account required.

For assistance contact our Regional Sales Managers.

Century Fasteners Corp. is the sole distributor of CureCorr products for North America.

Lektro-Tech S

A product for non-marine environments where rust prevention and lubricant is needed.

This new 5th generation product uses the most recent and innovative compounds to provide the most superior product on the market. This unique combination of ingredients provides protection against moisture, chlorides, acid vapor and other environmental contaminates over the range of types of corrosion.

It uses Nano sized particles of PTFE that are deposited into very small mechanical close-tolerance voids while providing a low coefficient of friction lubrication for sliding parts. It dries on contact leaving a dry, no odor thin film of protection. Lektro-Tech S cannot be washed off with water, has a wide temperature service range and can be applied without special equipment or instruction.

  • NAVAIR 16-1-540 (Navy)
  • Tech Order 1-1-689 (Air Force)
  • Tech Manual-1-1500-343-23 (Army)
  • Approved in US Tri-Service Corrosion Manuals
  • Exceeds Mil-C-81309

Independent Industry Approval by:

  • Boeing Aircraft
  • Bombardier
  • Cessna
  • Embraer
  • Gulfstream
  • Hawker-Beechcraft
  • Lear
  • NASA
  • Northrop-Grumman
  • Raytheon
  • Royal Norwegian Air Force
  • Sikorsky Aircraft
  • UK Royal Navy

Lektro-Tech S is the only product available that meets or exceeds ALL Requirements of MIL-DTL- 87177.

Lektro-Tech S has been tested in the harshest environments by some of the largest manufacturers in the world and all branches of the U.S. military and outperformed all other corrosion preventative compounds in the industry. 

Available Containers and PDF Label Sheets

Not for sale to the general public, business account required.

For assistance contact our Regional Sales Managers.


Corrosion Zero

A product for marine environments where a lubricant and rust prevention is needed. 

Corrosion Zero is a special corrosion preventative compound, an ultra thin hydrophobic film formulated without sulfates, chlorides, or halogens, that is unexcelled in preventing deterioration and contamination of all surfaces of electronic equipment and mechanical close-tolerance components.

This corrosion inhibitor contains extremely long-lasting, specially formulated and proprietary anti-corrosive inhibitors that provide a superior lubrication coefficient.

Unlike rigid coatings, the Corrosion Zero film remains flexible and will not crack when the treated material is subject to vibration and/or thermal expansion or contraction. It is the flexibility of the film that makes Corrosion Zero extremely effective against fretting corrosion. Also, because the film is not rigid, the film tends to be “self-healing” and will fill scratches that are caused by the mating and/or unmating of close tolerance parts.

Available Containers and PDF Label Sheets

Not for sale to the general public, business account required.

For assistance contact our Regional Sales Managers.


Quik Tann

A product to use where rust is already present.  It stops rust and prohibits future corrosion. 

Easily converts rust to a primed, paintable surface in 30 to 60 minutes.  Environmentally friendly  – won’t weaken the metal or irritate the skin.  It’s finished working when the areas of rust turn darker. Quik Tann does not have to be wiped off or otherwise removed, after drying you can apply coating directly to the surface. Unlike competing products with high acid contents, Quik Tann stops working when the Iron Oxide is inert, the metal remains unaffected.  Don’t worry about overspray, Quik Tann won’t harm fiberglass, rubber or painted surfaces.  Quik Tann is a safe to use and does not require protective clothing.

Available Containers and PDF Label Sheets

Not for sale to the general public, business account required.

For assistance contact our Regional Sales Managers.


Gal-Bar

A product that eliminates galvanic corrosion. 

Eliminates galvanic corrosion by creating a barrier between dissimilar metals eliminating electrical current. This elimination of electrical current cures galvanic corrosion and prevents future corrosion caused by an electrical current between two dissimilar metals. Gal-Bar is easy to apply and cures quickly. This non-flammable product is safe for aluminum, metal, copper, stainless steel and brass. 

Not for sale to the general public, business account required.

For assistance contact our Regional Sales Managers.